DF PROFINET IO | The onboard Device doesn't work

Issue:

Additional information

I do not get the DF PROFINET IO device to work.

Hardware:

• DF PROFINET IO PCI/CPCI/PCIe

Software:

• Windows, LabVIEW

• DF PROFINET IO LabVIEW VISA Driver

Solution:

Using the device:

• The device gets the configuration automatically from the controller (PROFINET Standard). Use the configuration tool of your controller and configure your Kunbus device with I/O – Sub-Modules.

• Start the Kunbus DF PROFINET IO Device application (Getting Started LabVIEW or Windows).

• Start your Controller.

• The Device receives the configuration from the Controller, which you defined before.

Double check the device names in the configuration of the PROFINET controller.

Open

(right click to enlarge the image)