CODESYS Checklist
You want to put CODESYS and the involved examples we deliver into operation? Then you are in the right place.
To get the Revolution Pi CODESYS examples up and running, the versions must be compatible.
Currently, the 64 bit image is not supported. If you would like to use CODESYS on the RevPi, please install the 32 bit version. https://revolutionpi.com/tutorials/downloads?noredirect=en-US
Regarding the release notes of the Revolution Pi Library for CODESYS the following versions are necessary:
Note: When using CODESYS Control for Raspberry Pi 4.10.0.0 you may be required
to increase the PlaceholderFilePath from default 1 to 2. This may be due to the CODESYS Control occupying this path internally. More information here:
For CODESYS Control for Raspberry Pi - 4.8.0.0
[SysFile]
PlaceholderFilePath.1=/etc/revpi, $configrsc$For CODESYS Control for Raspberry Pi - 4.10.0.0
[SysFile]
PlaceholderFilePath.2=/etc/revpi, $configrsc$You can select and download a special version in the CODESYS Store as follows:
“Versions”
2. Select and download the right version
