Configurator III Log - Profibus Master

Initially please check the used Kunbus-ConfiguratorIII version, logged in the first lines of C:\ProgramData\Configurator3\ABM_TO_DFXX.log
e.g: (the latest version is currently the one of Mar 2019)

ABM to DFXX Converter

Version: 1.6.4.0 - Apr  7 2017
...

Log in ABM_TO_DFXX ends with `Perror`line ...		Description

Log in ABM_TO_DFXX ends with `Perror`line ...		Description
`READ_SERIAL_NUMBER NTError = 0x0 Perror = 0x26`		Board not reachable. Board may be offline or a wrong resource is chosen.
`PARAM_FUNCTION NTError = 0x0 Perror = 0x0`		No error occurred. PB-Master works fine.
`MANAGE_PROFIBUS_CONF - MPC_READ_CHECKSUM NTError = 0x0 Perror = 0x15`		Configuration error while trying access the Master. (e.g. `Perror = 0x15`: the Profibus Master is not configurable because its Auto Slave option is activated)
	`0x0 SUCCESS_0` `0x2 MPC_UNKNOWN_COMMAND` `0x10 POLL_LIST_ALREADY_RUNNING` `0x11 DUPLICATE_PB_ADDRESS` `0x12 STORED_IMAGE_IS_INVALID` `0x13 DEVICE_IS_NO_PB_MASTER` `0x14 HARDWARE_ERROR` `0x15 AUTO_SLAVE_ACTIV`