Skip to end of banner
Go to start of banner

DF PROFINET IO Checklist

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

If you want to commission a DF PROFINET IO module this article is right for you.

Preparation

  1. Install the latest driver version 2.0.5

  2. Download the getting started document here: https://www.kunbus.com/pc-cards-profinet-io.html

Commissioning as PROFINET Master

  1. Go to chapter 2 PROFINET IO C and C++ Sample.

  2. Follow the steps and LED Staus to test the device for function.

If the LED status of each step matches, the device works as expected.

Commissioning as PROFINET Slave

  1. Go to chapter 3 Operation as PROFINET IO-Device

  2. Follow the steps and LED Staus to test the device for function.

If the LED status of each step matches, the device works as expected.

Commissioning as PROFINET master and PROFNET slave together

  1. Go to chapter 4 Simultaneous operation of PN IO Controller and PN IO Device

  2. Follow the steps and LED Staus to test the device for function.

If the LED status of each step matches, the device works as expected.

  • No labels