Skip to end of banner
Go to start of banner

CODESYS Checklist

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 51 Current »

You have a RevPi Module and you want to put CODESYS and the involved examples we deliver into operation? Then you are in the right place.

To get the Revolution Pi CODESYS examples up and running, the versions must be compatible.

In unlicensed demo mode, the runtime is stopped after approx. 2 hours.

Prerequisites

Implementation

You can watch Dirk’s helpful video tutorial here to view how easy it is to put everything in the right place:

https://www.youtube.com/watch?v=EF-Jtd6mPLE

FAQ

Don't I still have to adapt a configuration file?

  • No, since PiCtory version 2.4.0.0 or higher there is no need to manually configure the config.rsc PlaceholderFilePath in /etc/CODESYSControl_User.cfg.

Are my existing licenses valid if I switch from "CODESYS Control for Raspberry Pi" to "CODESYS Control Linux ARM SL"?

When switching to "CODESYS Control Linux ARM SL" the licenses for "CODESYS Control for Raspberry Pi" are no longer valid. Reactivating these licenses is not possible. To ensure you have the correct licenses for your system, please contact CODESYS directly.

Which license is the right one?

CODESYS FAQ

  • Which CODESYS license can I use for my Revolution Pi device?

  • Where did the Raspberry Pi MC SL license go, or is there an alternative?

  • No labels