Skip to end of banner
Go to start of banner

How to open a Revolution Pi Flat Module

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

If you want to flash an image to the RevPi Flat Module, you have to

  1. open the case - there is no USB-OTG connection to the eMMC of the Compute Module of the device by design.

  2. follow the steps from here

RevPi Flat Backup and Restore Image

The warranty is voided by disassembly.

RevPi Flat
There are no images attached to this page.
RevPi Flat 2.JPGRevPi Flat 3.JPGRevPi Flat 4.JPGRevPi Flat 5.JPG

  • No labels