Skip to end of banner
Go to start of banner

Firmware Update Modular Gateway Module for Ethernet/IP

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Files needed

Pleasre request the required files from the KUNBUS Support team.

Instructions

Make sure that the module is not disconnected from the power supply during the process

  1. Set IP address

  2. Connect to the module with a FTP program e.g. FileZilla.

    1. User: Admin

    2. Password: 1701

  3. Copy the KFU file into the root directory

  4. Copy the content of the folder "targetfiles" into the root directory

  5. Wait until all transfers have been completed successfully

Reboot

  1. Now disconnect the device from power for at least 5 seconds

  2. Reconnect the circuit for at least 1 minute

Check

You can check the firmware version via

  • Login on the web frontend

  • No labels