Commissioning Modular Gateway Ethernet/IP with Codesys

Here you will find a technical description of how to configure the KUNBUS gateway Ethernet/IP with Codesys.

System overview

these devices have been used for this application note

• KUNBUS Gateway EtherNet/IP

• Revolution PI Core 3 / 3+ / S or Connect / + / SE

please connect your devices as shown in the illsutration below

Preparation

Please follow the instructions of the checklists:

• follow the checklist below

  • RevolutionPi Checklist

• install Packages on Codesys IDE

  • https://revolutionpi.de/tutorials/quick-start-2/

  • Codesys Checklist

• Install runtime on the Revolution Pi Connect

  • https://revolutionpi.com/codesys-runtime-installieren-3/

  • 1 hour test lizence.

• optional: install codesys lizence

  • /wiki/spaces/PROD/pages/1017282586

• Set ETH 1 with a static IP 192.168.1.100

  • #sudo nano /etc/dhcpcd.conf

  • # Example static IP configuration:
    interface eth1
    static ip_address=192.168.1.100/24

• install KUNBUS EtherNet/IP EDS file into Codesys IDE

  • Download the necessary ESI file → KUNBUS Gateway EtherNet/IP | EDS file

  • CODESYS_QMWtqCBqmb.mp4

Create a Codesys Project

• Create Project

  • How to create a codesys project

Implementation