| Table of Contents |
|---|
Additional Information
https://revolutionpi.com/tutorials/pin-belegung-core-2?noredirect=en-US
Features
see in the link below
https://revolutionpi.de/analoges-digitales-io-modul
8 Analog Outputs
8 Analog Inputs
4 Digital Inputs or Outputs
Overview Interface
https://revolutionpi.com/tutorials/uebersicht-aio-2/pin-belegung-revpi-aiocore-2
...
Setup Configuration
...
select your main module in PiCtory and drag to the right or left side, depending on which device you have, the RevPi MIO
...
Configure the RevPi MIO
the RevPi MIO is a combination of the RevPi AIO and the RevPi DIO. In the following, we show how the Analog and digital inputs can be configured.
Troubleshooting
https://revolutionpi.com/tutorials/images/firmware-update
Analog Interface
Analog Input for Voltage Measurement
if you want to measure the Analog value from an input
...
| Code Block |
|---|
piTest -r AnalogInput_1 |
Analog Input for Level Detection
If you are looking for a voltage threshold, then set the following.
...
| Info |
|---|
For more information, read the following article: https://revolutionpi.com/tutorials/analoge-eingaenge-konfigurieren-2?noredirect=en-US |
Digital Interface
the digital interfaces (4 pins) on the top of the RevPi MIO can be configured individually. Each can be set as input or output, also the mode can be configured.
...
Commissioning RevPi DIO | DI | DO
...
...
...
Further Information
https://revolutionpi.com/tutorials/images/firmware-updatepin-belegung-core-2?noredirect=en-US