If you would like to learn how easy it is to access the processor image via Docker using a simple example, this is the right place to start.
With a Revolution Pi Connect module and a DIO module, an output is controlled via Docker.
Preparation
Create a hardware configuration using RevPi Connect Module and DIO Module
Connect a 24V LED to DIO output 1 or output 2
Install Docker
curl -fsSL https://get.docker.com -o /tmp/get-docker.sh sudo sh /tmp/get-docker.sh sudo docker run hello-world sudo usermod -aG docker pi # restart shell exit
Create the “io.sh” script on your device
Run the example
Execute the following command - the parameter “70” points to the outputs of the DIO module.
docker run -i -t --device=/dev/piControl0 -v /home/pi/files/io.sh:/io.sh debian bash /io.sh 70