Can I install a backup image from a RevPi Core on a RevPi Core3+?
The image created for the RevPi Core is incompatible with the RevPi Core 3+ due to differences in hardware or firmware. To resolve this issue, you may need to modify the image or create a new image specifically for the RevPi Core 3+.
I have a USB-Serial interface and get transmission errors, what can I do?
After about a week uptime, Ethernet communication seems to stop. What can I do?
Please update your image. You may use this guide Revolution Pi Checklist
See original discussion: https://revolutionpi.de/forum/viewtopic.php?f=3&t=3088
I don’t enough space to upgrade my Revolution Pi Core 3. What can I do?
Please take a look here: (40) Can't upgrade - Revolution Pi Forum
How can I avoid the problem?
The Ethernet port on the front of the Revolution Pi Core uses Auto-MDIX for automatic detection, which does not always work reliably. Disable Auto-MDIX and configure the connection speed and duplex mode manually.
sudo ethtool -s eth0 duplex full speed 100
Would it be possible to install LabVIEW on a Revolution Pi device?
No, see the original discussion here: