Skip to end of banner
Go to start of banner

Configuring cRIO PBMS (PROFIBUS Master/Slave) in cRIO 904X / 905X

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Issue:

During the PROFIBUS configuration with the Configurator 3 an issue occurs which doesn't allow to configure the cRIO PBMS.

The cRIO PBMS used in the latest cRIO Controllers/Chassis (904X and 905X) need to be configured as described below.

The hardware doesn't show up in the Configurator 3 Hardware Selection

Solution:

Download and extract the files

Copy the files to your PC:

“C:\Program Files (x86)\KUNBUS GmbH\Configurator III\BitFiles\”

  • No labels