Skip to end of banner
Go to start of banner

RevPi RPiBoot Checklist

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

\uD83E\uDD14 Problem

You want to use RPiBoot and there seems to be no connection via USB? If yes, then you are at the right place.

\uD83C\uDF31 Solution

  1. Check if the USB cable is intact. There are USB cables that come without all the necessary data lines.

  2. Check if you are using the latest downloads. Maybe the RPiBoot.exe, which is needed to communicate with the compute module under Windows, is available in a newer version.
    https://www.raspberrypi.com/documentation/computers/compute-module.html#setting-up-the-cmio-board

  3. Try to connect using a Linux environment. Unfortunately, some USB related problems do not work under Windows but under Linux.

  4. Change the USB host e.g. your desktop PC with a laptop or similar.

For RevPi Core S/SE and Connect S/SE/4, RPIBOOT version Dec 16 2022 version 20221215 or higher must be installed.

To check this, start rpiboot. In the first line you will find the version.

Original discussion

https://revolutionpi.de/forum/viewtopic.php?f=4&t=3101&p=10999#p10999

https://www.raspberrypi.com/documentation/computers/compute-module.html

https://github.com/raspberrypi/usbboot

  • No labels