Page Comparison

...

You can also do this with the Revolution Pi Connect +/S. For this, you can also use a CON module.

...

Additional Information

• On each Pi BridgePiBridge, we support a maximum of 5 devices. Only one GW can be used per Pi Bridge PiBridge side, and the gateway must always be the last component.

• No gateways or IO modules can be used on the ConBridge. There are special CON modules for this.

  • https://revolutionpi.com/tutorials/revpi-con-m-bus-overview/?noredirect=en_US

  • https://revolutionpi.com/tutorials/uebersicht-revpi-con-can/?noredirect=en_US

• The Revolution Pi Core SE and Connect SE do not have GW functionality. This means that no KUNBUS GW can be connected there. For more information, see the following link.
  https://revolutionpi.com/new-s-series-and-se-series/?noredirect=en_US

• There are not only physical gateways. We also support virtual gateways such as Modbus RTU and Modbus TCP. Only these two can be used as Slave or as Master.

• In the following links you will find some application notes that will help you.

  • Revolution Pi Gateway Tutorial

  • Modular Gateway FAQ

• General information

  • https://www.kunbus.com/modular-gateways

  • https://revolutionpi.com/manual/?noredirect=en_US

...