...
This page shows a few examples of how KUNBUS Gateways can be used in and in combination with RevolutionPi products:
Modular Gateway PROFINET IRT
Modular Gateway EtherCAT
Modular Gateway Ethernet/IP
...
| Drawio | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Use cases
Connectivity
Retrofit
IOT
HMI
Connect Two PLC with different protocols.
...
| Drawio | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Use cases
Connectivity
Control a RevolutionPi IO-Modules from an external device
...
| Drawio | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Use cases
Remote I/O
IOT
Retrofit
Additional Information
on On each PiBridge, we support a maximum of 5 devices. Only one GW can be used per PiBRidge PiBridge side, and the gateway must always be the last component.
No gateways or IO modules can be used on the ConBridge. There are special CON modules for this.
The RevolutionPi Core SE and Connect SE do not have GW functionality. This means that no KUNBUS GW can be connected there.
For more information, see the following link.
https://revolutionpi.com/new-s-series-and-se-series/?noredirect=en_USThere are not only physical gateways. We also support virtual gateways such as Modbus RTU and Modbus TCP. Only these two can be used as Slave or as Master.
In the following links you will find some application notes that will help you.
General information
...