Checklists
Ausgewählte Artikel
- Revolution Pi Checklist
All data on the device will be deleted. The customer is responsible for data backup and data protection. The checkboxes are only there for self-control, they have no other function. We want to ensure that you and we don’t spend time on problems that can be avoided by resetting the device to the factory defaults. Therefore, we have provided this checklist for
- CODESYS Checklist
You have a RevPi Module and you want to put CODESYS and the involved examples we deliver into operation? Then you are in the right place. To get the Revolution Pi CODESYS examples up and running, the versions must be compatible. In unlicensed demo mode, the runtime is stopped after approx. 2 hours.
Mehr Artikel
- Defective Devices Process
If you think that you have a defective device and want to know where to start, you are right here: Start by contacting support - you can help us to save time by using the “Defective Device” request. The support team tries to make the device functional again by troubleshooting
- RevPi RPiBoot Checklist
\uD83E\uDD14 Problem You want to use RPiBoot and something doesn't work, you've come to the right place. \uD83C\uDF31 Solution Connect the RevPi correctly. Some steps must be executed in a specific order, as outlined below: - Disconnect the power supply from the RevPi. - Connect the micro-USB cable to the RevPi and to the computer where RPiBoot will be executed
- RS-485 Checklist
\uD83E\uDD14 Problem You want to communicate over Modbus-RTU and there are suspicious errors. The underlying bus is RS-485. \uD83C\uDF31 Solution There is only one Modbus Client on the RS485 bus There is one bus with two ends without Y-branch There is a bus termination of 120 Ohm at both ends of the bus. The following modules contain an activatable terminating
- Revolution Pi Heating Checklist
If you feel like you're having temperature-related issues and are wondering what to do about it, you've come to the right place. Installation with chimney effect Check ambient conditions and compare these with the temperatures specified in the data sheets Clock frequency down in the Web Status Activate the video driver Open the file sudo nano /etc/boot/config.txt
- PiCtory Checklist
Update PiCtory to the newest version. To avoid problems, open PiCtory in incognito mode or delete the browser cache Clear the browser cache Check PiCtory version: pi@RevPi123834:~ $ apt show pictory Package: pictory Version: 2.6.0-1+revpi11+2 Priority: optional Section: contrib/electronics Maintainer: KUNBUS GmbH
- Basic Information Checklist
This checklist helps you to pass on all relevant information about your problem to the support team. This way, your support case can be dealt with as quickly as possible. \uD83D\uDCD8 Checklist Which KUNBUS products are used? Which KUNBUS devices are affected? Take a photo of the front of the devices you are using so that the QR code is easy to read. Describe
- Node-RED Checklist
Revolution Pi Node-RED Checklist: Image Types: Image Types: There are two image types for Revolution Pi devices: Full Image and Lite Image. When using the Full Image, Node-RED is pre-installed. For instructions on starting Node-RED and creating your first flow, refer to the Node-RED Tutorial!--https://kunbus-gmbh.atlassian.net/servicedesk/customer/portal/1/article
- Modbus Checklist
The terminology changed according to modbus.org . Unfortunately, this conversion has not yet been completed here. Update to the newest stable Revolution Pi Image Update PiCtory to the newest version. Modbus RTU Set the timing of the action interval to 1000ms. This is the default value. Check if