Skip to end of banner
Go to start of banner

DF PROFINET IO | Support Request - LabVIEW VISA DRIVER

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

You cannot find and solve your issue and you need further help?

Please contact us at: support@kunbus.com

For Support and to speed up your request - please provide us following information about your system:

back to FAQs

Action

Additional information

Screenshot of:

  • Device Manager – (If available (“NI-VISA Device” Right click: Driver Property

Shown errors and information of Tab-Driver / General

Screenshot of:

  • Windows: Apps & Features – KUNBUS Software visible

Screenshot of:

  • NI MAX – My System/Software

Furthermore, check if the NI VISA driver package is installed

Screenshot of:

  • The firmware version of your DF PROFINET IO board.

  1. Therefore, connect the PCs Ethernet network port with the DF PROFINET IO Controller port (green LED on after booting).

  2. Start the KUNBUS Network Configurator and send us a screenshot of the board’s properties (version string visible)

(right click to enlarge the image)

Screenshot of:

  • Information of errors: shown in LabVIEW, your devices or in Configurator 3.

  • No labels