cRIO PBMS configuration (PROFIBUS Master/Slave) in cRIO 904X / 905X

Issue:

During the PROFIBUS configuration with the Configurator 3 an issue occurs which doesn't allow to configure the cRIO PBMS.

The cRIO PBMS used in the latest cRIO Controllers/Chassis (904X and 905X) need to be configured as described below.

The hardware doesn't show up in the Configurator 3 Hardware Selection

Solution:

Download and extract the files

Copy the files to your PC:

“C:\Program Files (x86)\KUNBUS GmbH\Configurator III\BitFiles\”