| Table of Contents |
|---|
For a synchronized distributed measurement at several locations in a network, we would like to use some TAP Curious. Is there a possibility to synchronize them via the External IO ports, e.g. by applying a common second pulse to the inputs, which is recorded in the capture and to which the time stamps can be synchronized in the data post-processing?
After researching the manual, I can tell you that the digital input can only be linked to filter parameters.
This means that it is possible to consider the state of the digital input when you create a packet filter.
For example, you can define that data is only output on the uplink port if:
High level is present at the input
Certain other filter criteria apply
I am having a problem setting the IP address to work on our network when accessing the web interface.
...