Dear Customer, the RevolutionPi Revolution Pi is based on an open source platform, which can lead to misbehavior of the devices. To solve some problems, you can use Ansible. Because Ansible is all about automation, it requires instructions to accomplish each job. With everything written down in simple script form, it's easy to do version control and automate repetitive tasks with relative ease. Regardless of whether it is a single system or many. It is available as open source software under the GNU General Public License for DevOps around the world.
...
- After the installation, enter the following commands on your Ubuntu Terminal:
| Code Block |
|---|
sudo apt update sudo apt install ansible tree |
A Playbooks.zip file is provided to solve your problem. Copy this Playbook and paste it into the Ubuntu drive (\\wls$). The "\\wls$" drive is created immediately after you install the Ubuntu app on your Windows machine. There are the following files in the playbooks.zip folder:
Inventory
".yml" file
a folder "files" with other files in it.
| Info |
|---|
Just pay attention to the folder where the playbooks is inserted. For an Ansible script to run, you must be in the folder where it is pasted. For the realization of this tutorial, the playbook.zip was copied and inserted in the root folder of the "\\wls$" drive |
- The "Inventory" must be adjusted. In the inventory, you must enter the IP address of your target system. All devices on which the tasks are to be executed must be entered under [bet] as shown below.
First, type the following command in terminal of ubuntu on windows
| Code Block |
|---|
unzip playbooks.zip
cd playbooks
sudo nano inventory |
...
- Automatic copying of the public key to the target system
Ansible automates important tasks on a target system via SSH. The SSH key of the Ansible host is located on the target system. With ssh-keygen, an SSH key is created generated for your target system and entered into a repository. The repository is then always different. Type the following command in terminal of ubuntu on windows
| Code Block |
|---|
ssh-keygen |
After creating | Info |
|---|
After we have created an SSH key, we can |
...
enter it |
...
manually in the |
...
authorised_keys file of the remote computer or use the ssh-copy-id command. |
...
Type the following command in terminal of ubuntu on windows
| Code Block |
|---|
| cat We will use the ssh-copy-id command to simplify this process. Simply call the ssh-copy-id command and pass the path to the public key as follows:
|
| Code Block |
|---|
# Copying the SSH key with SSH-copy-id for the system of our example
ssh-copy-id -i /root/.ssh/id_rsa.pub |
...
Copy the SSH-Key from cat /root/.ssh/id_rsa.pub and insert in the file .ssh/authorized_keys.
Type the following command in terminal of your Target system (The Terminal you are using to be connected to your RevPi. For example: Putty, MobaXterm)
| Code Block |
|---|
sudo nano .ssh/authorized_keys |
...
Running the Ansible script
Example 1: To ping a device
you have received for your issue a playbooks.zip order from the Kunbus Support to apply some tasks on your device or to solve a problem.
The playbooks.zip folder contains as standard:
Inventory
"Test.yml" file
a folder "files" with other files in it.
Type the following command in the ubuntu terminal on Windows to ping the device you want to reach.
| Code Block |
|---|
cd playbooks #if you are not if the file playbooks
ansible bet -i inventory -m ping |
...
Example 2
you have received for your issue a playbooks.zip with the following content, after unzip it.
...
Test2.yml is in this case the YAML file that contains the instructions to perform a task.
| Code Block | ||
|---|---|---|
| ||
name: RevPi as Switch
hosts: bet
tasks:
- name: Copy file src './files/interfaces' dest '/etc/network/interfaces
become: yes
copy:
src: ./files/interfaces
dest: /etc/network/interfaces
- name: apt update cache and install bridge-utils
become: yes
ansible.builtin.apt:
name: bridge-utils
update_cache: yes
- name: disable dhcpcd.service
become: yes
ansible.builtin.service:
name: dhcpcd.service
enabled: no
- name: enable networking
become: yes
ansible.builtin.service:
name: networking
enabled: yes
- name: Reboot
become: yes
reboot: |
This script does nothing else than:
Copy the file "interfaces" in order files from the host to the repository "./etc/network/interfaces” in Target System
The following commands are then executed.
sudo systemctl disable dhcp.service
sudo systemctl enable networking
sudo reboot
Type the following command in terminal of ubuntu on windows to run the "Test2.yml" file
| Code Block |
|---|
cd playbooks #if you are not if the file playbooks pi@192.168.0.66 |
- Cloning the repository
We have a repository on Github where all the essential elements for solving the tasks are stored. This repository can be reached through this link https://github.com/RevolutionPi/revpi-ansible-recipes.
- Apply the instructions below to be prepared to run an Ansible script.
| Code Block |
|---|
git clone https://github.com/RevolutionPi/revpi-ansible-recipes.git
cd revpi-ansible-recipes |
With the command ls -l, you can see all contents of the order revpi-ansible-recipes
...
- An "Inventory" must be created. In the inventory, you must enter the IP address of your target system. All devices on which the tasks are to be executed must be entered under [bet] as shown below (see the picture inventory adjustment)
First, type the following command in terminal of ubuntu on windows
| Code Block |
|---|
sudo nano inventory |
Enter the following declarations into the inventory
| Code Block |
|---|
[target]
localhost
[revpi]
<ip-adress of your host> remote_user=pi ansible_python_interpreter=/usr/bin/python3 |
...
- From the repository revpi-ansible-recipes/roles/network-bridge/README.md → revpi-ansible-recipes/README.md at master · RevolutionPi/revpi-ansible-recipes (github.com)) you get the Description of how to edit the Ansible script that performs your Tasks and how to configure it with the roles.
For our example, we use the role network-bridge. To see all available roles
| Code Block |
|---|
cd roles |
then
| Code Block |
|---|
ls -l |
...
At the moment of editing this tutorial, there is only one role in the repository: network-bridge.
Now get back to the last order revpi-ansible-recipes and editing the new ansible-script (myplaybook.yml), that perform the task for the role network-bridge.
| Code Block |
|---|
cd ..
sudo nano myplaybook.yml |
...
- Now run the Ansible script in terminal of ubuntu on windows
| Code Block |
|---|
ansible-playbook -i inventory -u pi Test2myplaybook.yml |
After a successful running of the script, you will get a message like shown on the following picture:
...
Once the script has been successfully executed, we can see the status of the execution, as shown in the following illustration:
...