We are happy that you have chosen our product and you found your way to this quick start.
This quick tart describes how to setup your DF PROFINET IO board (Controller and Device) with the LabVIEW Driver and run the example code.
Content
The product
Basics
Instructions
Help
The product
| Expand |
|---|
| title | DF PROFINET IO - details |
|---|
|
For further information check out the DF PROFNET IO product site: https://www.kunbus.com/pc-cards-profinet-io.html |  Image Modified | Hardware: Software package: LabVIEW™ PROFINET VISA driver for Windows 7 / Windows 10 and LabVIEW™ RT Configurator 3 for PROFNIET diagnosis and configuration Network Configurator for diagnosis and configuration
| | The PROFINET Controller and Device are located as shown: The STATUS LED bar shows red after booting and after a couple of seconds green for “standby - DF PROFINET IO board is ready to use” on the Controller port. |  Image Modified | | Info |
|---|
Keep in mind this is a quick start! Refer to the user documentation for a more detailed description. (LabVIEW: menu/ #tbd |
| Image Modified |
|
...
The PROFINET Controller and Device are located as shown below.
The status LED bar shows red after booting and after a couple of seconds green for “standby - DF PROFINET IO board is ready to use” on the Controller port.
...
| Info |
|---|
Keep in mind this is a quick start! Refer to the user documentation for a more detailed description. (LabVIEW: menu/ #tbd |
Image Removed
...
Basics
the LabVIEW Driver does support Windows 7 / 10 - 64/32 Bit + LabVIEW 2014 32 Bit and higher
refer to the section Help if you got some issues by following the instructions below
refer to the DF PROFINET IO | FAQ if you need any further help
make sure you installed the National Instruments NI VISA driver package
Instructions
| Expand |
|---|
| title | Setting up the System |
|---|
|
Action | Shut down your system and mount the board in your PC | boot your PC | Install the LabVIEW PROFINET VISA driver package the file is located on a DVD or USB stick in the boards shipping box Chose the setup bit version regarding your Windows OS
|
|
| Expand |
|---|
| title | Setting up your first PROFINET Network |
|---|
|
Setting up your first PROFINET network by using the Boards controller and device Action | Additional Information | Connect the two Ethernet ports (PROFINET - controller and device) on the board with a Ethernet cable directly |  Image Modified | Configure the board as shown in the video: #tbd new video | board_conf.mp4 | Close the Configurator 3 (it is only for configuration and diagnosis) | | Run the LabVIEW GettingStarted example code as shown in the video The boards controller and device are exchanging data via PROFINET #tbd convert to .mp4 (playable in FF) | vid2.mkv |
|
Help
find below some typical things you can check and do if you got any issue during setting up the DF PROFINET IO board.
| Expand |
|---|
|
Action | Additional information | Keep your Windows and LabVIEW updated | | Make sure the NI VISA driver package is installed Visible in NI MAX #tbd new screenshot | | Check if the board is recognized on your PC in the device manager |  Image Modified | Make sure to allow remote control for your NI VISA driver by adding “*” as permission #tbd neuer screenshot |  Image Modified |
|
| Expand |
|---|
| title | Using the PROFINET Controller or Device GettingStarted Code example |
|---|
|
Action | Additional information | You can not run Configurator 3 and DF PROFINET IO LabVIEW VIs at the same time. Close the Configurator 3 for using the controller or device. It is for configuration and diagnosis
| | be aware to use the correct Ethernet port for the controller or the device | Image Modified | APDU status 0x21 is shown on your controller: #tbd scs you have either the device not running or the wrong PROFINET device name used in your configuration
| |
|
Releated Articels
| Filter by label (Content by label) |
|---|
| showLabels | false |
|---|
| max | 5 |
|---|
| spaces | com.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@968 |
|---|
| showSpace | false |
|---|
| sort | modified |
|---|
| type | page |
|---|
| reverse | true |
|---|
| labels | kb-how-to-article |
|---|
| cql | label = "kb-how-to-article" and type = "page" and space = "KS" |
|---|
|
| Page Properties |
|---|
|
Verwandte Vorgänge | | Jira Legacy |
|---|
| serverId | 6a616e0c-dd66-30e3-95b5-0fa763638e21 |
|---|
| key | SUP-414 |
|---|
|
|
|---|
|
