...

In general, there are different possibilities to output the messages on serial interfaces during boot:

• https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/README.md

• https://www.raspberrypi.org/documentation/configuration/uart.md

• https://elinux.org/RPi_Serial_Connection

...

No, this is not planned for the near future.

Others Questions…?

Now and then, the service crashes with the error "Main process exited, code=killed, status=11/SEGV". The crash appears to be random and is not related to any event happening in the application, nor the controller.

Take a look here:

...

Do I have to format the RevPi when I connect the RevPi to a Windows device?

...