...
The network port is also connected to the internal USB hub.
Is it possible to use a cable extender instead of the default RevPi Connector?
The Revolution Pi products as well as expansion modules such as IO or gateways must be connected with the default RevPi Connector Bridge we have provided for this purpose so that the runtimes are not affected. Otherwise, there may be miscommunications between the modules.
However, you can try to open 2 jumpers and connect them to one line. Depending on the application, this might work.
| Note |
|---|
If this leads to errors, we cannot support this. |
Is the DIO capable of driving inductive loads without causing damage, or must free-wheeling diodes be used?
...