| Table of Contents |
|---|
Can I/What can I do…?
Can I start a Profinet master?
Yes, this works for example like this https://revolutionpi.com/forum/viewtopic.php?t=3935#p14039
Debian Buster supports Python in version 3.7. The security support for Python 3.7 ends on 06/27/2023. Would it be possible to upgrade Python?
...
Have a look at the following video tutorial Tutorial which explains how How to create your own rap file:
...
If you use virtual machines switching to USB 3.1, all flashes run cleanly.
What can I do if I get the message “Error 5 Access Denied” from
...
win32diskimager?
Use the software balenaEtcher instead of Win32DiskImagerwin32diskimager
...
Can I switch the language of PiCtory?
Yes, see here
...
Can I use PiCtory and
...
CODESYS at the same time?
When downloading the Codesys CODESYS application, a config.rsc is automatically created by CodesysCODESYS, which is saved on the Codesys CODESYS project devices that are configured in CodesysCODESYS.
This configuration is created every time the Codesys CODESYS application is started and replaces the PiCtory configuration.
This means that any default PiCtory configuration saved or configured by PiCtory will be overwritten by the RevPi Codesys CODESYS application.
| Note |
|---|
PiCtory should not be used to configure devices (read only) if the RevPi Codesys CODESYS application is to run. |
I unfortunately can't find the MD5 checksum of the image, what can I do?
...
To this issue, we have a possible solution in our forum.
https://revolutionpi.de/forum/viewtopic.php?t=3376
RPiBoot.exe does not connect to my RevPi
...
module. What can I do?
Occasionally, the Linux equivalent tool can still connect to the device. Have a look here:
Building
RPiBoot.exeon your host system (Cygwin/Linux)https://www.raspberrypi.org/documentation/hardware/computemodule/cm-emmc-flashing.md
...
You can create your own image and thus your own list of licenses, see here:
...
https://revolutionpi.de/forum/viewtopic.php?f=6&t=3038#p10879
Is there another way to rest the driver programmatically, i.e., via C language?
Yes, with piControlReset();
...
Kernel and image updates are communicated through the official channels, e.g., the news board in the forum. Please subscribe to this. See video tutorial:
...
We currently only provide Raspberry Pi OS (former Raspbian) based images. So, even with Buster, it will be based on the Raspberry Pi OS and not directly on Debian. We are currently checking if we can also provide images based on Debian or another distribution. But we have no timeline if and when this will be ready.
When I flash an image, the transfer rate is quite low.
Use the tool “SD Memory Card Formatter” and quick format your eMMC
I
...
wonder if the Compute Module 3+ you're using in the Compact series can support displaying a Node-
...
RED dashboard via the HDMI port on a touchscreen, for example.
We're planning to release RevPi 4 Modules within this year. I can just say that it is possible to display Node-Red RED Dashboards on an HDMI touch screen. But the performance depends on your application. If it comes to performance, I recommend you to build yourself a custom image (Image-Bakery) in case you don't need to control IO data you can disable piControl, etc.
...